What You Need:
RubiQ 2.0
2.0mm Hex Driver
Steps:
Verify that your motor configuration matches the diagram below.
- Motors 1 and 4 need to have black-cabled motors.
- Motors 2 and 3 need to have red-cabled motors.
- Improperly installed motors will prevent your drone from flying.
Use the 2.0mm hex driver to tighten the M3x7 motor screws connecting the motors to the motor arms.
Then, Use the 2.0mm hex driver to tighten the M3x6 screws that connect the arms to the PDB.